503E-3-S Busbar Copper Punching Bending Machine
Main function:
To cut/punch(all kingds of round/square/special holes and slot type)/chamfer/horizontal bending/
vertical bending/ emboss/Press cable thread /twist/anti-press flat the copper/aluminum busbar ect.
Function introduction:
●● 1. Cutting unit adopts double-column shear structure (patent number: ZL201120262802.1),Cut mouth flat,
no burr, no waste.
●● 2. Punching unit adopts Nodular cast iron,4/6/8 modes position turrent punching structure which is a totaly
whole one,improving concentric degree of moulds,
●● prolonging the service life of the moulds,saving time of change.
●● 3. Bending unit adopts closed bending structure,making it is more uniform when processing horizontal
bending and embossing. Also prolonging the service life.
●● 4. Bending unit adopts double work table,achieved a real sense of the three position working at thge same
time while working without impact each other.
●● 5. Adopting PLC controlled, bending angle can be cnc,and with a storage function.
●● 6. Three units of the machine can work at the same time,not affecting each other,Improving the processing
efficiency.
●● 7. Hydraulic tank with thick plate weldin g,and is treated by phosphating, making hydraulic oil can be long time
used and will not degenerate.
The Paramter:
Item |
Model |
|
DGWMX503E-3-S |
DGWMX503E-3 |
|
Max. Punching Force (KN) |
500 |
500 |
Punching Diameter Range (MM) |
Φ4.3-32 |
Φ4.3-32 |
Max. Process Thickness (MM) |
16×200 |
16×200 |
Max. Vertical Bending Width (MM) |
120 |
120 |
Work Bench Size(MM) |
1600×1400/1020×500 |
1600×1400/1020×500 |
Size Of The Machine (MM) |
1920×1550×1500 |
1920×1550×1465 |
Weight Of The Machine(KG) |
1650KG |
1650KG |
Bending Angle Cnc |
YES |
NO |
The Three Units Work At The Same Time |
YES |
YES |
Contact: Mike
Phone: +8613853146766
Tel: +860531-55500506
Email: Leanne@busbarmc.com
Add: Jinan jingshi west load NO.9566